Claw-Appl-2-a
Product Family

Miller Permanent Roof Anchors

Roof anchors are for permanent anchorage connection.

Miller Logo

Product Numbers

Details

RA40/

Double D-Ring Roof Anchor
Stainless steel permanent double D-ring roof anchor over a wood ridge peak. Complete with [8] 16d nails.

RA40/

Double D-Ring Roof Anchor
Double-D permanent roof anchor for installation over a ridge peak

RA40/50BULK

Double D-Ring Roof Anchor
Stainless steel permanent double D-ring roof anchor over a wood ridge peak. Complete with [8] 16d nails. Bulk pack of 50.

RA41/

Single D-Ring Roof Anchor
Stainless steel permanent single D-ring roof anchor installed on a wood roof sub-surface or vertical wall.

RA41/

Single D-Ring Roof Anchor
Single-D permanent roof anchor for installation on a roof or vertical wall

RA41/50BULK

Single D-Ring Roof Anchor
Stainless steel permanent single D-ring roof anchor installed on a wood roof sub-surface or vertical wall. Bulk pack of 50.

RA45/

The Claw Roof Anchor
Stainless steel permanent roof anchor, designed to provide a single anchorage point when installed on a wood rafter or truss member. Complete with UV-resistant flashing, protective cap and [12] 1-1/2 inch nails.

RA45/

The Claw Roof Anchor
Claw permanent roof anchor for installation over a rafter

RA45/25BULK

The Claw Roof Anchor
Stainless steel permanent roof anchor, designed to provide a single anchorage point when installed on a wood rafter or truss member. Complete with UV-resistant flashing, protective cap and [12] 1-1/2 inch nails. Bulk pack of 25.

RA45/50BULK

The Claw Roof Anchor
Stainless steel permanent roof anchor, designed to provide a single anchorage point when installed on a wood rafter or truss member. Complete with UV-resistant flashing, protective cap and [12] 1-1/2 inch nails. Bulk pack of 50.

RA45CAP/

The Claw Roof Anchor
Replacement cap for RA45 Claw roof anchor

RA45FLASH/

The Claw Roof Anchor
Replacement flashing for RA45 Claw roof anchor



Key Features

Single D Permanent Roof Anchor:

  • The Single D permanent roof anchor is designed to provide one (1) D-ring anchorage point when securely installed on a wood roof sub-surface or vertical wall
  • Stainless steel construction; plated steel D-ring
  • Accommodates single user for fall protection

Double D Permanent Roof Anchor:

  • The Double D permanent roof anchor is designed to provide two (2) D-ring anchorage points when securely installed on a wood roof sub-surface
  • Stainless steel construction; two plated steel D-rings
  • Accommodates single user for fall protection

Claw Permanent Roof Anchor:

  • The Claw permanent roof anchor is designed to provide a single anchorage point when securely installed on a wood rafter or truss member. The Claw anchor fits wood sizes 2" x 4", 2" x 6", 2" x 8", 2" x 10" or 2" x 12".
  • Stainless steel construction
  • Accommodates single user for fall protection

Recommended Industries/Use

Hazards

Regulations

  • Meets all applicable OSHA, ANSI and CSA standards

Warranty Information

We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our Limited Lifetime Warranty, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. Should a product issue surface, contact us at 800/873-5242. Manufacturing specifications are subject to change without notice.

Specification Sheets

For full engineering specification sheets, go to the spec sheet section under downloads and documentation



Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions enclosed with products.

Contact Miller Technical Service at 800/873-5242 or 814/423-2118 email: millertechexpert@sperianprotection.com

Chat Operator

Have a question about
Fall Protection?

Chat with a Tech Specialist
Mon-Fri 8 a.m. - 5 p.m. EDT

Honeywell Safety Products

 

Honeywell Safety Products
900 Douglas Pike
Smithfield, RI 02917
USA (former Sperian) 800.430.5490
USA (former North) 800.430.4110
CANADA 888-212-7233

 

Contact Us >

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.