Miller Turbo T-BAK PFL

View Moreimageimageimageimage

Product Family

Miller Turbo T-BAK™ Personal Fall Limiter

Tie-back safely with a retractable! The Miller Turbo T-BAK is a Tie-Back Personal Fall Limiter (PFL) designed to tie-back anywhere along the lifeline. For 100% tie-off fall protection,

Miller Logo

Product Numbers

Details

MFLT-1/7.5FT

Miller Turbo T-BAK Tie-Back Personal Fall Limiter
Turbo T-BAK without unit connector

MFLT-2/7.5FT

Miller Turbo T-BAK Tie-Back Personal Fall Limiter
Turbo T-BAK with a 17D-1 steel twist-lock carabiner

MFLT-3/7.5FT

Miller Turbo T-BAK Tie-Back Personal Fall Limiter
Turbo T-BAK with a 17D-2 lightweight, aluminum twist-lock carabiner

MFLT-4/7.5FT

Miller Turbo T-BAK Tie-Back Personal Fall Limiter
Turbo T-BAK with a locking snap hook with 3/4-in. (19mm) gate opening

MFLT-5/7.5FT

Miller Turbo T-BAK Tie-Back Personal Fall Limiter
Turbo T-BAK with ANSI Z359-compliant snap hook with 3/4-in. (19mm) gate opening

MFLTB-1/7.5FT

Miller Twin Turbo T-BAK D-Ring Connector System
Twin Turbo D-Ring Connector with two MFLT-1/7.5FT Turbo T-BAK units



Key Features

  • 7.5-ft. (2.3m) Working Capacity
  • User-Rated to 400-lbs. (181kg) Capacity
  • Cost-effective alternative to tie-back shock-absorbing lanyards.
  • All-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site.
  • Designed for anchoring below a user's harness back D-ring for greater safety.
  • Integrated shock absorber especially designed for tie-back applications with load indicator device.
  • Meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24-inches (.62m) or less of lifeline extends out of the housing when the unit is fully retracted.
  • The new patent-pending Miller Twin Turbo™ D-Ring Connector easily adapts two Miller Turbo T-BAK PFLs for continuous 100% tie-off fall protection.

Recommended Industries/Use

Hazards

Regulations

  • Meets applicable OSHA, ANSI, CSA and CE standards, including ANSI Z359.1

Warranty Information

We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our Limited Lifetime Warranty, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. Should a product issue surface, contact us at 800/873-5242. Manufacturing specifications are subject to change without notice.

Specification Sheets

For a full engineering specification sheet, go to Literature & Documents

Working Capacity

7.5-ft. (2.3m)

User-Rated Capacity

400-lbs. (181kg)

Housing

High Impact Nylon



Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions enclosed with products.

Related Products

Chat Operator

Have a question about
Fall Protection?

Chat with a Tech Specialist
Mon-Fri 8 a.m. - 5 p.m. EDT

Honeywell Safety Products

 

Honeywell Safety Products
900 Douglas Pike
Smithfield, RI 02917
USA (former Sperian) 800.430.5490
USA (former North) 800.430.4110
CANADA 888-212-7233

 

Contact Us >

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.