Product Family

Miller Grip Temporary Anchorage Connectors

Portable/reusable anchorage connectors designed for use in concrete applications or with a Friction Bolt (specific models).

Miller Logo

Product Numbers



Friction Bolt Anchorage Connection
Friction Bolt Anchorage Connector for Friction Bolts with an outside diameter of 1.5 inches (39mm) [Often used in under-ground mining]; Rated for 10,000 lb. ultimate tensile strength

Key Features

  • A safe anchor point is established when the Miller Grip anchor is inserted into a properly-sized, cured concrete hole
  • The reusable Miller Grip anchor can be removed and simply re-installed in a new location
  • Designed for vertical or overhead/ceiling surface applications
  • Model 497 can be used with SkyWalker Horizontal Lifeline components for a two-person system (see DF497 Kit on page 35 for details)
  • Multi-use Grips can be used for anchoring scaffolding, material handling and removal of concrete debris after demolition
  • Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life
  • Designed for use in cured concrete with a compression strength of at least 3,000 psi
  • Color-coded to differentiate fall protection (models 496 & 497 are green) and multi-use (Models 498 & 499 are silver) per OSHA regulations

Recommended Industries/Use



  • Meets all applicable OSHA, ANSI and CSA standards

Warranty Information

We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our Limited Lifetime Warranty, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. Should a product issue surface, contact us at 800/873-5242. Manufacturing specifications are subject to change without notice.

494 Friction Bolt Anchorage 2016

Miller Grip Brochure - US

Learn more about the Miller Grip

Miller Grip Friction Bolt Brochure - US

Learn more about the Miller Grip Friction Bolt

Miller Grip 494 Manual - US

Miller Grip 494 Instruction Manual

Miller Grip 496 Manual - US

Miller Grip 496 Instruction Manual

Miller Grip 497 Manual - US

Miller Grip 497 Instruction Manual

Miller Grip 498 Manual - US

Miller Grip 498 Instruction Manual

Miller Grip 499 Manual - US

Miller Grip 499 Instruction Manual

Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions enclosed with products.

Honeywell Safety Products Australia / New Zealand

Honeywell Safety Products Australia Pty Ltd

45 Grosvenor Street,

Abbotsford, Victoria 3067

Australia Tel: 1300 139 166

Australia Fax: 1300 362 491

New Zealand Tel: 0800 322 200

New Zealand Fax: 0800 322 266

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.