Product Family

Söll MultiRail stainless steel system

The Söll MultiRail Stainless Steel Horizontal Rail System conforms to the latest European standard EN 795:2012 type D and CEN/TS 16415:2013 regulations for horizontal anchor devices. Söll MultiRail is not only for installation at foot level or overhead but can also be installed sideways for use as a handrail. The high quality stainless steel product line is resistant in the toughest environmental conditions.

Miller Logo

Product Numbers



63 Multirail section
Stainless Stel


Rail connector


Horizontal bend


Closed Glider
Stainless Steel


Openable Glider
Stainless Steel


Multirail wheeled trolley-Overhead use
Stainless Steel


Rail end stop

Key Features

Key features


Söll MultiRail Stainless Steel system offers an adapted solution for any industrial building or wind energy turbine.

Various fixation possibilities are available for different structures. Just a few bolts and tools are required for a quick and easy assembly of the rail system.

Söll MultiRail provides fall protection for up to 6 workers across a maximum span of 6m, depending on the rail configuration. If a fall occurs, this effective system ensures that structural damage is prevented through energy absorption by the several intermediate brackets and the end-fixing devices.

Four different runners ensure smooth movement of the worker along the rail: closed runner for frequent use of the same rail, openable runner for flexible use on several rail systems, wheeled runner for overhead applications and a lockable runner for working situations where the shuttle should not move.


Robust rail system that is quick and easy to install

In case of a fall, the energy is reduced by the bending of the rail, thereby the structure remains protected. The low friction mounting brackets transmit in the event of a fall the absolute minimum impact to the structure. In conformity with the EN795:2012 standard, the rail can absorb forces up to 70 kg without permanent deformation.


The rail is not fixed into mounting brackets and therefore compensates for thermal expansion. Easy connection of curves and T-junctions allow the system to be easily customized to any structure.


A worker connected to the Söll MultiRail system can pass safely along vertical sections up to 1 m high. 


The Söll MultiRail horizontal anchor device is often used in the following sectors:
• Storefronts
• Flat or steep roofs
• Working platforms on masts and buildings
• Hangars, shipyards, cranes
• Industrial plants
• Wind nacelles
• Water treatment


Söll MultiRail can also be used as an overhead solution in combination with a self retractable lifeline attached to a wheeled shuttle for example in following applications:
• Truck cleaning
• Maintenance
• Loading bay


Suitable for working in suspension
The system is suitable for working in suspension under the following conditions:
• Up to 2 users in the system

• The structure is rigid enough that no deformation occurs during usage

• Connection to two wheeled overhead mobile anchor points (shuttles), one for suspension and one for fall protection


Recommended Industries/Use



  • Conforms to EN 795:2012 type D standard

Warranty Information

We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our warranty does not apply to abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our warranty of one year after delivery, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. Should a product issue surface, contact us at +33 248 53 08 97 (France, Spain, Portugal, North Africa) or +49 9281 8302 0 (Northern and Central Europe, Italy). Manufacturing specifications are subject to change without notice.

Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions enclosed with products.

France, Spain, Portugal, North Africa : +33 248 53 08 97 and email : 

Northern and Central Europe, Italy : +49 9281 8302 0 and email : 

France, Spain, Portugal, North Africa : +33 248 53 08 97 and email : 
Northern and Central Europe, Italy : +49 9281 8302 0 and email :

Honeywell Safety Products Australia / New Zealand

Honeywell Safety Products Australia Pty Ltd

45 Grosvenor Street,

Abbotsford, Victoria 3067

Australia Tel: 1300 139 166

Australia Fax: 1300 362 491

New Zealand Tel: 0800 322 200

New Zealand Fax: 0800 322 266

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.