Produktfamilj

Söll Vi-Go Vertical Cable System

Söll Vi-Go Ladder Climbing Safety Systems provide the ultimate in safety with continuous fall protection when climbing fixed ladders: remarkably ergonomic and versatile vertical steel rope system with integrated fall protection.

 

Söll Vi-Go is a fall protection system that can be retrofitted onto existing climbing devices such as ladders or rungs used in wind turbine, power supply, telecommunication or other industry.
It is basically made up of a steel rope or cable (three different types), fastening elements and a revolutionary guided-type fall arrester.

Miller Logo

27826 / 1034574

Söll Vi-Go Guided-type fall arrester
- quick and easy to use because of its single-hand operation - dual locking mechanism prevents accidental unlocking of the fall arrester from the rope - spring-activated securing mechanisms always moves the device back to its initial position - durable absorber - integrated mechanism prevents incorrect fastening of the shuttle to the rope - stainless steel device : corrosion resistant

24838 / 1017370

Manual Intermediate Holder for 8 mm cable
- holds the cable in position and prevents it from moving excessively in case of wind - rope must be released from clamping position to allow the shuttle to pass through it. The rope must be clamped back in manual brackets at the respective positions before getting off the system. - cost-effective, light with possibility of retrofitting

24839 / 1017373

Manual Intermediate Holder for 10 mm cable
Same specification as the manual intermediate holder for 8mm cable

24840 / 1017375

Automatic Intermediate Holder for 8 mm cable, for rungs 22-36mm
- holds the cable in position and prevents it from moving excessively in case of wind - the shuttle pass through automatic brackets without a manual action : allows for user comfort, quicker climbing and descending - brackets are to be installed by passing the rope through it.

25000

Automatic Intermediate Holder for 8 mm cable, with fixing plate, for rungs 18-26mm
- holds the cable in position and prevents it from moving excessively in case of wind - the shuttle pass through automatic brackets without a manual action : allows for user comfort, quicker climbing and descending - brackets are to be installed by passing the rope through it.

26554 / 1033241

Heavy Duty Tensioner galvanized steel
Cable tensioner with integrated tension indicator

25401 / 1028710

Heavy Duty Tensioner stainless steel
Cable tensioner with integrated tension indicator

24815 / 1017382

Universal Beam bracket galvanized
- clamp serving as cable fixing - enables to hang Cable and rope end parts - can be fastened : to pipe structures of various diameters, angular or flat steel profiles

24814 / 1017383

Universal Beam bracket stainless steel
Same specifications as the galvanised Universal Beam bracket, however made of stainless steel

24807 / 1017384

Universal Rung Bracket galvanized
- clamp serving as cable fixing - enables to hang Cable and rope end parts - can be fastened directly to the rungs of a ladder - various elongated holes at varying distances enable to mount it to most ladders

24806 / 1017385

Universal Rung Bracket stainless steel
Same specifications as the galvanised Universal Rung Bracket, however made of stainless steel

24843 / 1014740

8 mm cable galvanized
7x19

24841 / 1013502

8 mm cable stainless steel
7x19

24844

10 mm cable galvanized
7x19

24842 / 1015901

10 mm cable stainless steel
7x19

24845 / 1017430

Cable swage for 8 mm galvanized cable
- can only be used at the upper end of the cable - the exact rope length must be specified at the time of ordering - advantages : reduced componenent cost and assembly time

24846 / 1017440

Cable swage for 8 mm stainless steel cable
Same specifications as the galvanised cable swage, however in stainless steel

24847 / 1017450

Cable swage for 10 mm galvanized cable
Same specifications as the galvanised cable swage,however for 10 mm cable

24848 / 1017451

Cable swage for 10 mm stainless steel cable
Same specifications as the galvanised cable swage, however in stainless steel

24849 / 1009509

Turnback loop fixing parts for 8 mm cable
- can be used on both ends of the cable - rope length can be variable - extremely flexible during installation

24850 / 1017682

Turnback loop fixing parts for 10 mm cable
Same specifications as the Turnback loop fixing parts for 8 mm cable

24851 / 1017386

Swageless Terminal for 8 mm cable
- available for all cable types - for quick installation

24852 / 1017387

Swageless Terminal for 10 mm cable
Same specifications as the Swageless Terminal for 8 mm cable

25124

Cable end swage 8 mm

25125

Cable end swage 10 mm

23168 / 1007470

8 mm swaging indicator (25 pieces)

23169 / 1007471

10 mm swaging indicator (25 pieces)

17298 / 1033000

Tamper evident paint
Permanent security marking for cable end connections

25051 / 1017840

Plattform Extension galvanized

25846 / 1033242

Plattform Extension stainless steel

24854 / 1017388

ID-Plate

25121 / 1029673

Rung Reinforcement 63 cm
Enables cable extension above the ladder



Viktigaste egenskaperna

The user wears a full body harness (EN 361 compliant) and fastens the karabiner hook of the Söll Vi-Go shuttle to the fall protection/fall arrest attachment ring of a harness. Users can start climbing or descending once the shuttle has been fixed to the rope.

 

Söll Vi-Go Continuous Ladder Climbing Safety Systems with Automatic Pass-Through

  • Uninterrupted fall protection – Uniquely-designed Vi-Go Cable Sleeve automatically bypasses intermediate cable guides, keeping both hands free for climbing; travels smoothly along cable and locks instantly in the event of a fall.
  • Easy, one-hand operation for attachment/detachment from the system. No pins/chains or external parts to lose or damage.
  • Automatic pass-through cable guides secure lifeline to prevent cable wear and enable the system to accommodate curves.
  • Withstand harsh environments – The Vi-Go Cable Sleeve is constructed with durable, corrosion-resistant aluminum and stainless steel components.
  • Attachment mechanism engineered to prevent incorrect installation, ensuring greater safety. Unit will not open if attached incorrectly.
  • Cable sleeve integrated shock-absorbing element – Provides a “dual shock-absorbing system” to further reduce fall forces. Protects the system and ladder from damage. – Once a fall occurs, the deployed shock absorber indicates the unit must be taken out of service. 
  • Accommodate 5/16-inch (8mm) or 3/8-inch (10mm) cable.

Automatic Pass-Through Cable Guides

  • Söll Vi-Go automatic pass-through cable sleeve glides easily through intermediate cable guides uninterrupted. Hands and feet are free for climbing.

Söll Vi-Go Ladder Climbing Safety Systems with Manual Pass-Through

  • Require manual removal/insertion of cable with intermediate guides.
  • Cable guides secure lifeline to prevent cable wear.
  • Manual Vi-Go Cable Sleeve follows the worker while ascending and descending.
  • Cable sleeve locks instantly in the event of a fall. • Accommodate 3/8-inch (10mm) cable.
  • A cushioning element on each sleeve reduces the load on the cable fixings when there are several users.   

Versatile system

  • System components are readily available in different models or materials.
  • The users can choose between prefabricated or flexible system components. 
  • The selection of system components made of galvanised or stainless steel enables to adapt to environmental conditions

Rekommenderade branscher/rekommenderat användningsområde

  • Annat
  • Kemi
  • Byggindustri
  • Tillverkning
  • Gruvdrift
  • Kommunala tjänster
  • Olja och gas
  • Transport
  • Vatten och energi
  • Kärnkraft
  • Vindkraft

Risker

  • Fall från höga höjder

Föreskrifter

  • Meets EN 353-1 standard (and all applicable OSHA, ANSI and CSA standards)

Garantiinformation

We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our Limited Lifetime Warranty, we will repair or replace the product at our expense. Should a product issue surface, contact us at +33 248 53 08 97 (France, Spain, Portugal, North Africa) or +49 9281 8302 0 (Northern and Central Europe, Italy). Manufacturing specifications are subject to change without notice.

Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions enclosed with products.

France, Spain, Portugal, North Africa : +33 248 53 08 97 and email : lignedevie.hsp@honeywell.com 

Northern and Central Europe, Italy : +49 9281 8302 0 and email : scs-hof@honeywell.com 

 

France, Spain, Portugal, North Africa : +33 248 53 08 97 and email : lignedevie.hsp@honeywell.com 

Northern and Central Europe, Italy : +49 9281 8302 0 and email : scs-hof@honeywell.com

 

Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >

Datablad

Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.