BACOU BEAL MONTANA S3 HRO CI SRC_6539060_a

Visa fler

Produktfamilj

STITCHED ORIGINALS MONTANA

Fleece lined safety rigger boot with non metallic 200J toecap and anti-puncture midsole. Rubber stitched outsole

hsp-logo

6539060-37/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 37

6539060-38/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 38

6539060-39/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 39

6539060-40/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 40

6539060-41/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 41

6539060-42/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 42

6539060-43/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 43

6539060-44/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 44

6539060-45/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 45

6539060-46/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 46

6539060-47/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 47

6539060-48/7

BACOU MONTANA S3 HRO CI SRC
Full grain oiled water resistant leather rigger boot with warm fleece lining and side pull-on tabs. Complies with EN ISO 20345:2007 S3 CI HRO SRC standard. Size 48



Viktigaste egenskaperna

Safety rigger boot with non metallic 200J toecap and anti-puncture midsole. nitrile stitched outsole

Rekommenderade branscher/rekommenderat användningsområde

Risker

Föreskrifter

  • - European Directive: 89/686/EEC - EC PPE Category II - Standard: EN ISO 20345:2007 - Marking : S3 HRO CI SRC Quality Assurance: ISO 9001:2008

Tidigare varumärke

BACOU

Upper

Oiled water resistant leather

Lining

Isothermal fleece, 75% wool

Outsole

Stitched technology cleated nitrile outsole

Heat resistant outsole

By contact up to 300°C

Toecap

SPACIUM 200J non metallic

Anti-puncture midsole

FLEXIUM non metallic

Insole

Isothermal fleece lined

Size range

EU 37 - 48 UK 4 - 12



Instruction notice provided with product. Life Cycle: If the footwear is supplied with a part of, or the whole sole unit made of polyurethane: We advise that the footwear should be used in the limit of 3 years following the manufacturing date, which figures on the footwear. After this time limit, certain factors such as : exposure to sunlight, hydrometry, temperature changes, could cause a modification in the structure of the material, which would no longer maintain the same performance levels with regards to the requirements defined in the European Directive 89.686 CEE. If the footwear is supplied with a sole unit made from a material other than polyurethane: We advise that the footwear should be used in the limit of 5 years following the manufacturing date, which figures on the footwear. Storage: All of these time limits indicated, concern only new footwear in their original packaging, kept in a controlled stock area, not subject to rapid changes in temperature or humidity levels. Cleaning: - After use leave your footwear to dry in an aired place away from heat. - Remove any excess dust or dirt with a brush. - Remove any marks using a damp cloth and soap if necessary. - Finally polish any grain or pigmented leathers using a commercially available shoe care product.

Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >

Datablad

Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.