check & go level 5

Visa fler

Produktfamilj

CHECK & GO

Knitted gloves cut resistant level 1, 3 and 5 with color coding. Designed with easy visual recognition of the cut protection level. PU or nitrile coating. High precision work.

hsp-logo

2332255

Check & Go Red PU 1
Red Polyurethane (PU). Coating on palm and fingers. Red color. (Sizes 6 to 11). EN 388 - 4131.

2332265

Check & Go Red Nit 1
Red Nitrile. Coating on palm and fingers. Red color. (Sizes 7 to 10). EN 388 - 4121.

2332242

Check & Go Amber PU 3
Orange Polyurethane (PU). Coating on palm and fingers. Orange color. (Sizes 7 to 11). EN 388 - 4342.

2332552

Check & Go Amber Nit 3
Orange Nitrile. Coating on palm and fingers. Orange color. (Sizes 7 to 10). EN 388 - 4343.

2332545

Check & Go Green PU 5
Green Polyurethane (PU). Coating on palm and fingers. Green color. (Sizes 6 to 11). EN 388 - 4543.

2332555

Check & Go Green Nit 5
Green Nitrile. Coating on palm and fingers. Green color. (Sizes 7 to 10). EN 388 - 4543.

2299400

Check & Go Deeptril 1
Knitted glove in polyamide, Nitrile foam coating, fully dipped. Gauge 13. Length: 25 cm.



Ytterligare information

For minimum order quantities, please contact our local office. To access the test data of each reference, please refer to the technical specification documents located in each SKU.

Viktigaste egenskaperna

The Check & Go line features seamless and lightweight gloves cut resistant 1, 3 and 5 with PU or nitrile coating.

Helps to provide safety managers  with visual recognition of the cut protection level

COMFORT
The tight knit gives the gloves perfect support, limits the penetration of dirt and offers a good touch.The ventilated back optimise their breathability. The cool Dyneema® touch (cut level 3 and 5) gives an added sensation of comfort.
RESISTANCE
The Dyneema® and polyamide thread provides outstanding properties against cuts.The polyurethane/nitrile coating at the palm and fingertips provides outstanding abrasion resistance.
SAFETY
Color coding on top of the hand and coating color helps safety manager and workers to visually recognize the level of cut protection.

 

Rekommenderade branscher/rekommenderat användningsområde

Risker

Föreskrifter

  • EN 420-2003 - General requirements
  • EN 388-2003 - Mechanical risks

Garantiinformation

Honeywell Safety Products warrants that it's Honeywell Protective Gloves are free from defects in material and workmanship. This limited warranty does not cover any product or component found to have been altered, misused, abused, tampered with or improperly maintained or to have deteriorated due to aging of any component made of rubber or any other elastomer. The limited warranty does not cover any damage, loss or expense due to damage caused by accident, abuse, improper maintenence, use or misuse of the product.

Materials

Dyneema®, polyamide

Coating

PU or Nitrile

Gauge

Light (13)

Maintenance / cleaning

This article can be cleaned at 40°C without risk of damaging the mechanical performances.

Storage information

Keep gloves in their original packaging in a cool, dry, dust-free, away from sources of heat and direct light.



Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >

Datablad

Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.