controlled-environnement main

Visa fler

Produktfamilj

CONTROLLED ENVIRONMENT

Reusable / disposable gloves for clean rooms and controlled environement.

 

hsp-logo

CE412W

CHEMSOFT
Unpowdered nitrile glove. Translucent. Length : 30 cm. AQL : 1,5

AK1815O

AK
Unlined Latex glove Powderfree Diamond pattern (Sizes 7S to 11XXL)

SK142W

SK
Unlined nitrile glove Powderfree Sandpatch finish (Sizes 8M to 11XXL)



Ytterligare information

For minimum order quantities, please contact our local office. To access the test data of each reference, please refer to the technical specification documents located in each SKU.

Viktigaste egenskaperna

The controlled environment line features Nitrile or latex gloves for clean room or controlled environment.

Gloves are :

- Powderfree to reduce particulate and extractable contamination

- Cleanroom packaged for protection against airborne contamination. Double bagged with cleanroom compatible packaging and labeling materials.

- cleaned with a special process to reduce particulate contamination

- with a low level of particles and extractables

- marked with a size embossed on the gloves so there is no ink that contaminate the process

 

Rekommenderade branscher/rekommenderat användningsområde

Risker

Föreskrifter

  • EN 420-2003 - General requirements
  • EN388-2003 - Mechanical risks
  • EN 374-3 - Chemical risks (Category 3 : Irreversible risks)

Tidigare varumärke

North

Garantiinformation

Honeywell Safety Products warrants that it's Honeywell Protective Gloves are free from defects in material and workmanship. This limited warranty does not cover any product or component found to have been altered, misused, abused, tampered with or improperly maintained or to have deteriorated due to aging of any component made of rubber or any other elastomer. The limited warranty does not cover any damage, loss or expense due to damage caused by accident, abuse, improper maintenence, use or misuse of the product.

Materials

Nitrile, latex

Lining

Powderfree

Chemical resistance

SK142W : J (N-Heptane), K (Caustic coda 40%), L (Sulphuric acid 96%) // AK1815O: A (Methanol), K (Caustic coda 40%), L (Sulphuric acid 96%)

Maintenance / cleaning

We recommend not to clean these gloves to avoid any contamination.

Storage information

Keep gloves in their original packaging in a cool, dry, dust-free, away from sources of heat and direct light.



Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >

Datablad

Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.