2091073

View More

Product Family

ELECTROSOFT BICOLOR

Dielectric latex gloves to protect against electrical risks from 500 to 36000 volts. Version in cut edge. Bicolor (red outside, beige inside) for easier and faster dectection of defects during visual inspection. Need over glove for mechanical protection.

hsp-logo

Product Numbers

Details

2091073

ELECTROSOFT BICOLOR CL00 36CM
Bicolor (red outside : beige inside) natural latex insulating glove. Cut edge. Class 00. Thickness : 0,5mm. Length : 36 cm. (Sizes 7 to 12)

2091074

ELECTROSOFT BICOLOR CL0 41CM
Bicolor (red outside : beige inside) natural Bicolor (red outside : beige inside) insulating glove. Cut edge. Class 0. Thickness : 1mm. Length : 41 cm. (Sizes 7 to 12)

2091075

ELECTROSOFT BICOLOR CL1 41CM
Bicolor (red outside : beige inside) natural latex insulating glove. Cut edge. Class 1. Thickness : 1,5mm. Length : 41 cm. (Sizes 7 to 12)

2091076

ELECTROSOFT BICOLOR CL2 41CM
Bicolor (red outside : beige inside) natural latex insulating glove. Cut edge. Class 2. Thickness : 2,3mm. Length : 41 cm. (Sizes 8 to 12)

2091077

ELECTROSOFT BICOLOR CL3 41CM
Bicolor (red outside : beige inside) natural latex insulating glove. Cut edge. Class 3. Thickness : 2,9mm. Length : 41 cm. (Sizes 8 to 12)

2091078

ELECTROSOFT BICOLOR CL4 41CM
Beige natural latex insulating glove. Cut edge. Class 4. Thickness : 3,4mm. Length : 41 cm. (Sizes 10, 12)



Additional Information

For minimum order quantities, please contact our local office. To access the test data of each reference, please refer to the technical specification documents located in each SKU.

Key Features

The Electrosoft latex line features insulating latex gloves for linemen.
COMFORT
The ergonomic shape and lightly powdered interior make the gloves easy to slip on and off.
RESISTANCE
The natural latex base offer high dielectric characteristics.Their thickness (from 0.5 to 2.9 mm) ensures good protection from 500 to 36000 volts of use.

SAFETY

Arc flash resistant depending on the class. Bicolor to better detect defect during visual inspection

Recommended Industries/Use

Hazards

Regulations

  • EN 60 903-2003 -
  • CEI 903-2002 -
  • Category 3 : Irreversible risks -

Historical Brand

Sofraf

Warranty Information

Honeywell  warrants that it's Protective Gloves are free from defects in material and workmanship. This limited warranty does not cover any product or component found to have been altered, misused, abused, tampered with or improperly maintained or to have deteriorated due to aging of any component made of rubber or any other elastomer. The limited warranty does not cover any damage, loss or expense due to damage caused by accident, abuse, improper maintenence, use or misuse of the product.

Storage : Store in original packaging (Opaque and anti-UVpackaging used for protection and instructions for use). Do not compact orfold. Do not expose to heat sources (sunlight, radiators, artificial light).Store between 10°Cand 21°C.
Inspection : Before each use, carry out a visual inspection and check the gloveinflation. Any puncture or perforation makes the gloves unusable.
Precautions : Do not expose to solvents or chemicalsthat may cause deterioration. Do not use the glove when damp.
Cleaning : use water and soap. Dry below 65°C with ambient humidity.
 

 

Minimum packaging : 1 pair.Opaque and antiUV single packaging used for protection and instructionsfor use.The Electrosoft gloves, made of latex, are free of allergies ( processto clean off proteine of latex). In case of allergic reaction to latexplease do not use electrosft gloves.
Marking :
The date of the electrical test made at the end of production is placed on every glove bag, as well as a lot number to ensure product traceability.
Gloves that are used frequently should be tested atintervals less than 6 month. Gloves that are used only occasionally should betested after each use and, in any case, at intervals of not more than 12months. Gloves held in stock should be retested at intervals not exceeding 12months.

Related Products

Honeywell Safety Products (UK) Ltd.

Edison Rd
Basingstoke RG21 6QD
United Kingdom
Phone: +44 (0) 1256 693 200
Fax: +44 (0) 1256 693 300Contact >

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.