Product Family

NorthFlex Light Task™ ESD

Anti-Static conductive gloves. Lightweight, 15 gauge liner made of copper based Thunderon® with low surface resistivity of <4.0 x 104 ? /sq when tested in accordance with EN 1149. Polyurethane coating on palm and fingertips

logo_North

Product Numbers

Details

NF15ESD

Light Task ESD - Anti-Static Conductive Gloves
Light Task ESD™ - Electro static conductive white nylon/copper seamless liner - white polyurethane palm coating - knit wrist - sizes 6XS, 7S, 8M, 9L, 10XL, 11XXL



Packaging Information

12 pair per pack, 144 pair per case

Key Features

Anti-Static conductive gloves. Lightweight, 15 gauge liner made of copper based Thunderon® with low surface resistivity of <4.0 x 104 ? /sq when tested in accordance with EN 1149. Polyurethane coating on palm and fingertips

Recommended Industries/Use

Hazards

Regulations

  • ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test
  • ANSI/ISEA 105 - ASTM F1790-97 Cut Test
  • EN388 - Mechanical risks from abrasion, cut, tear and puncture
  • EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
  • OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Warranty Information

LIMITED WARRANTY. Except for any warranty for a particular product or part specifically stated in our product literature, we warrant all goods sold under this agreement against defects in materials and workmanship for one year from shipment. In the event of such defects, we will, at our sole option and as your exclusive remedy, repair or replace the defective product without charge, or refund the price you have paid. In order for this warranty to be effective, you must notify us within 15 days of discovery of the defect. you must return the defective product to us within the warranty period, properly packaged and with insurance and transportation costs prepaid. We will reship the product to you at our expense in the United States. Products will conform to Honeywell published specifications if properly used and maintained and will be free from defects in materials and/or workmanship. no changes to Honeywell published specifications will be valid without Honeywell written consent. This warranty does not cover defects which we determine are because of accident, alteration, modification, negligence, misuse, abuse failure to perform adequate maintenance, or normal wear and tear.

Ambidextrous or Hand Specific

Hand specific

Coating

Polyurethane

Coating Color

Gray

Coating Pattern

Full palm, and fingers

Construction

Seamless knit, dipped

Cuff

Knit

Gauge / mil

15 ga.

Glove Type

General purpose

Length

NA

Liner

NA

Material

Thunderon®

Material Color

Gray

Overedge

Green (XS), Red (S), Blue (M), Yellow (L), White (XL), Orange (XXL)

Supported or Unsupported

NA

Surface Finish

Sand finish



Low surface resistivity of < 4.0 x104 ?/sq (when tested in accordance with EN 1149) which can prevent damaging electrostatic charge from accumulating

Technical Support is available Monday through Friday, 8:00 AM to 7:00 PM EST. 1.800.873.5242 hsptechsupport@honeywell.com

Honeywell Safety Products Middle East / India

PO Box 232362
Emaar Business Park
Building 2, Level 2, Office 201
Dubai, U.A.E.
Phone: + 971 4 450 5800
Fax: + 971 4 450 5900

Contact MEI >

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.