Produktfamilj

Laser Trak Detectable Earplug

Highly visible protection [visual/metal detectable]

Howard Leight

Viktigaste egenskaperna

  • Non-ferrous metal grommet and bright colors – easily detected by visual and automated inspection 
  • Self-adjusting polyurethane foam expands to fit virtually any wearer 
  • Contoured T-shape for easy insertion and wear

Rekommenderade branscher/rekommenderat användningsområde

Risker

Föreskrifter

  • 29 CFR 1910.95 - OSHA Occupational Noise Exposure (US)
  • ANSI S3.19-1974 - Attenuation Test Protocol (US)
  • Part II, (R.S.C. 1985, c. L-2) - Canada Labour Code
  • Z94.2-1994 - Attenuation Test Protocl (CAN)
  • 2003/10/EC - EU Hearing Directive
  • 89/686/EEC - EU Directive/PPE
  • Category II - EC Category/PPE
  • EN-24869-1:1993 - EU Standards
  • EN 352-2:1993 - EU Standards
  • NOHSC: 1007 (2000) - National Standard for Occupational Noise (AUS/NZ)
  • NR 15 - Security and Health of Work, Annexes 1 and 2, n°3.214/1978 - Occupational Noise Regulations (BR)
  • ANSI S12.6/1997 - Method B - Attenuation Test Protocol (BR)

Tidigare varumärke

Howard Leight

Color

Orange/Blue

Shape

T-Shape

Material

Polyurethane Foam/Brass

Packaging

Polybag

Cord

Polycord

NRR

32

Canada Class

A(L)

SNR

35

SLC80

25 dB / Class 4



  1. With clean hands, roll the entire earplug into narrowest possible crease-free cylinder. 
  2. Reach over your head with a free hand, pull your ear up and back, and insert the earplug well inside your ear canal. 
  3. Hold for 30 – 40 seconds, until the earplug fully expands in your ear canal. If properly fitted, the end of the earplugs should not be visible to someone looking at you from the front. 
  4. Proper Fit – If either or both earplugs do not seem to be fitted properly, remove the earplug and reinsert. 
  5. Removal – Gently twist earplug while slowly pulling in an outward motion for removal. 
  6. Acoustical Check – In a noisy environment, with earplugs inserted, cup your hands over your ears and release. Earplugs should block enough noise so that covering your ears with your hands should not result in a significant noise difference.

CARE + MAINTENANCE

  • INSPECT – Inspect prior to fitting, examine your earplugs for dirt, damage or extreme hardness—discard immediately if compromised.
  • DISCARD – For proper hygiene, discard Single-Use earplugs after use.
  • HYGIENE  – To maintain hygiene standards, Single-Use earplugs should be discarded at the end of every shift.

Relaterade produkter

Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >

Datablad

Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.