QB2HYG Banded Earplugs

Supra-aural banded protection

Howard Leight

Viktigaste egenskaperna

  • Soft pods rest partially in the ear for a balance of protection and comfort 
  • Patented band design prevents ear pods from touching dirty or contaminated surfaces 
  • Lightweight and portable designed especially for environments with intermittent noise hazards 
  • Includes pair of replacement pods

Rekommenderade branscher/rekommenderat användningsområde



  • 29 CFR 1910.95 - OSHA Occupational Noise Exposure (US)
  • ANSI S3.19-1974 - Attenuation Test Protocol (US)
  • Part II, (R.S.C. 1985, c. L-2) - Canada Labour Code
  • Z94.2-1994 - Attenuation Test Protocl (CAN)
  • 2003/10/EC - EU Hearing Directive
  • 89/686/EEC - EU Directive/PPE
  • Category II - EC Category/PPE
  • EN 352-2:1993 - EU Standards
  • EN-24869-1:1993 - EU Standards
  • NOHSC: 1007 (2000) - National Standard for Occupational Noise (AUS/NZ)
  • NR 15 - Security and Health of Work, Annexes 1 and 2, n°3.214/1978 - Occupational Noise Regulations (BR)
  • ANSI S12.6/1997 - Method B - Attenuation Test Protocol (BR)

Tidigare varumärke

Howard Leight


Orange [pod], Orange [band]

Pod Shape



Foam [pod], Polypropylene [band]


Resealable Bag



Canada Class





21 dB / Class 3

EU Certifications

  • European Directives – 89/686/EEC
  • EC Category PPE – Category II
  • Standards – EN 352-2:1993 / EN-24869-1:1993
  • EC Certification Number – 991028
  • EC Attestation Number – E 199920168
  • Laboratory – B.G.I.A.


AUS Certifications

  • Standardsmark License #1579
  1. Position the band under your chin. 
  2. Use your hands to press the ear pods well into the ear canal using an inward motion. 
  3. Protection levels are improved by pulling your ear up and back when fitting as shown.
  4. In a noisy environment, lightly press the band inward with your fingertips as shown. You should not notice a significant difference in noise level. 
  5. Proper Fit – If either or both earplugs do not seem to be fitted properly, remove the earplug and reinsert. 
  6. Removal – Gently twist earplug while slowly pulling in an outward motion for removal. 
  7. Acoustical Check – In a noisy environment, with earplugs inserted, cup your hands over your ears and release. Earplugs should block enough noise so that covering your ears with your hands should not result in a significant noise difference.


  • INSPECT – Prior to fitting, examine your earpods for dirt, damage or extreme hardness—discard immediately if compromised.
  • CLEAN – Wash pods and bands with mild soap and warm water only. Pat dry with a towel. Do not treat with any other substances, as the earpods may degrade and compromise use.
  • REPLACE – Replace pods every 2-4 weeks to ensure optimal protection and performance.


Honeywell Safety Products

Honeywell Safety Products Nordic AB
Strandbadsvägen 15
SE-252 29 Helsingborg
+46 42 88 200Kontakta oss >


Klicka på den här ikonen så visas de datablad som du vill ladda ner. När listan är klar sparas den i fem dagar. Du kan ha 20 datablad på listan. Tänk på att listan inte sparas om du inte skickar in den innan du stänger webbläsaren eller loggar ut från Min säkerhet.