Product Family

Viking Noise Blocking Earmuff

Multiple-position headband for alternative use [dielectric]

Howard Leight

Product Numbers



Viking V1 - multiple-position earmuff
Howard Leight VIKING V1 MUFF


Viking V3 - multiple-position earmuff
Howard Leight VIKING V3 MUFF

Key Features

  • Multiple-position headband allows wearer to select position over the head, behind the head or under the chin 
  • Alternative to cap-mounted earmuffs – wear with hard hats, face shields, respirators and other PPE 
  • Patented Air Flow Control™ technology delivers optimal attenuation across all frequencies without increasing earcup size or weight 
  • Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates [V2 and V3 only] 
  • Non-deforming outer headband withstands rough treatment in the toughest workplaces 
  • Snap-in ear cushions make replacement quick and easy 
  • Includes attached elastic headband strap for better positioning when worn behind the head or under the chin 
  • Dielectric construction suitable for electrical environments

Recommended Industries/Use



  • 29 CFR 1910.95 - OSHA Occupational Noise Exposure (US)
  • ANSI S3.19-1974 - Attenuation Test Protocol (US)
  • Part II, (R.S.C. 1985, c. L-2) - Canada Labour Code
  • Z94.2-1994 - Attenuation Test Protocl (CAN)
  • 2003/10/EC - EU Hearing Directive
  • 89/686/EEC - EU Directive/PPE
  • Category II - EC Category/PPE
  • NOHSC: 1007 (2000) - National Standard for Occupational Noise (AUS/NZ)
  • NR 15 - Security and Health of Work, Annexes 1 and 2, n°3.214/1978 - Occupational Noise Regulations (BR)
  • ANSI S12.6/1997 - Method B - Attenuation Test Protocol (BR)

Historical Brand


Warranty Information

There is a one years guarantee against defects in material and workmanship. The guarantee does not cover damage caused by misuse, abuse or unauthorised modifications.
  1. Place the earcups over each ear. 
  2. Adjust the headband by sliding the headband up and down. 
  3. Multiple-Position earmuffs can be worn either over-the-head, behind-the-head or under-the-chin. 
  4. When the earmuff is worn with the headband behind-the-head or under-the-chin, the headband strap must be attached to the slot in the upper part of the earcup as shown. 
  5. Firm Seal – Do seal the cushions firmly against the head. 
  6. Avoid Obstructions – Do not allow hair to obstruct the ear or the earmuff’s secure fit in any way. 
  7. Cover Ear Completely – The earcups should never fit crooked or askew over the ear.


  • INSPECT – Regularly examine earcups and ear cushions for cracksand leaks—discard if earcups are visibly damaged or compromised. Replace earcushions if damaged.
  • CLEAN – Wash earcups and ear cushions regularly with mild soap andwater. They may not be dipped into water. Do not treat with any othersubstances, as the ear cushions may degrade and compromise use.
  • REPLACE – As ear cushions and foam inserts can degrade over time,replace these every 6-8 months under normal wear, or every 3-4 months withheavy use or in humid/extreme climates.


Honeywell Safety Products Middle East / India

PO Box 232362
Emaar Business Park
Building 2, Level 2, Office 201
Dubai, U.A.E.
Phone: + 971 4 450 5800
Fax: + 971 4 450 5900

Contact MEI >

Data Sheet Lists

Click this icon to list the data sheets you'd like to download. Once submitted, the list will be saved for up to five days. You may list up to 20 items. Remember, lists that are not submitted will be lost when you either close your browser or log out of My Safety.